VigorSwitch G1240
 |
|
De VigorSwitch G1240 is een 24 poorts Gigabit websmart switch die beschikt over vier SFP combo poorten. Deze switch beschikt over QoS, poort mirroring, VLAN, LACP, LAN beveiliging, multicasting video stream protocol en SNMP en is een ideale kosten efficiënte oplossing voor het uitbreiden van uw netwerk.
| Interface | 24 x 10/100/1000Mbps Ports, RJ-45 | |
| 4 x SFP Dual-media Ports (Shared with 4 Gigabit Ports) | ||
| 1 x Reset Button | ||
| Standard Compliance | IEEE 802.3x Flow Control Capability | |
| IEEE 802.1q VLAN | ||
| IEEE 802.1p QoS | ||
| IEEE 802.1w Rapid Spanning Tree | ||
| IEEE 802.3ad Port Trunk with LACP | ||
| Performance | Switching Capacity | 48Gbps Forwarding Bandwidth for Switch, Non-blocking Switch Fabric Wire Speed Performance |
| 8 K MAC Addresses | ||
| 500KB On-chip Frame Buffer | ||
| Jumbo Frame Support to 9600 bytes | ||
| Unknown Unicast / Multicast / Broadcast / Storm Suppression | ||
| Port Mirroring | ||
| VLAN | Port-base VLAN | |
| IEEE802.1q Tag-base VLAN, 4094 Max, up to 24 Active VLANs | ||
| In tag-base VLAN, Supports Egress / Ingress Packet Filter | ||
| QoS | Supports Port based, Tag based, IPv4 ToS and DSCP | |
| Supports 802.1p QoS with Four-level Priority Queue | ||
| Supports Two Scheduling, WRR and Strict | ||
| Bandwidth Control | Supports Bandwidth Rating per Port Ingress and Egress Rate Limit 1000Mbps with 1Mbps Increment | |
| Protocol | LACP/Port Trunk | Port Trunking with 12 Trunking Groups |
| Up to 12 Ports for Each Group | ||
| Multicasting | Supports IGMP Snooping | |
| Network Security | Supports 802.1x Access Control for Multi-host Authentication for Port based | |
| Supports MAC based Authentication with Radius Server | ||
| SNMPv1, v2C Network Management | RFC 1213 MIB II | |
| RFC 1493 Bridge MIB | ||
| RFC 2863 Interface Group MIB | ||
| Power | 100~240 VAC, 50~60 Hz | |
| Operating Temperature | 0 to 40 °C | |
| Humidity | 10 to 90% RH (non-condensing) | |
| Dimensions | 44(H) x 442(W) x 170(D) mm | |
| Weight | 2.4 kg | |
SFP poorten
De 24 poorts VigorSwitch G1240 beschikt over vier SFP poorten voor flexibele fiber connectie. Met behulp van de SFP poorten zijn switches via een fiber uplink op elkaar aan te sluiten, waardoor een snelle uplink van de ene switch naar de andere switch gerealiseerd kan worden.
