VigorSwitch P2260
 |
|
Met behulp van de betrouwbare VigorSwitch P2260 is het mogelijk PoE apparaten via de netwerkkabel te voorzien van stroom. Deze PoE switch beschikt over fast ethernet poorten en is o.a. te gebruiken in combinatie met IP telefoons met PoE ondersteuning. Er kunnen IP telefoons op deze switch worden aangesloten. Deze IP telefoons worden dan middels de netwerkkabel voorzien van stroom, dit is vooral handig op plaatsen waar stroomvoorziening via het stopcontact moeilijk is.
Voor een goede prestatie en beveiliging van uw netwerk beschikt deze switch over VLAN functionaliteit, zowel port base, tag base, als ook Q-in-Q VLAN. Daarnaast ondersteunt de switch port trunking en Quality of Service. Met de port trunking functionaliteit kunnen poorten gebundeld worden, zodat de bandbreedte verhoogd wordt. QoS zorgt voor gegarandeerde bandbreedte, dit is met name van belang bij de inzet van de switch in VoIP oplossingen. Deze functionaliteiten zorgen ervoor dat de VigorSwitch P2260 een betrouwbare stabiele oplossing is voor uw netwerk.
| Interface | 24 x 10/100Mbps Ports, RJ-45 | |||
| 2 x SFP/ Gigabit Dual-media Ports | ||||
| 1 x Console Port | ||||
| 1 x Restart Button | ||||
| 1 x Ledset Button | ||||
| Standard Compliance | IEEE 802.3 10Based-T Ethernet | |||
| IEEE 802.3u 100Based-TX Ethernet | ||||
| IEEE 802.3ab 1000Based-TX Ethernet | ||||
| IEEE 802.3z 1000Based-TX/FX Ethernet | ||||
| IEEE 802.3x Flow Control Capability | ||||
| IEEE 802.1q VLAN | ||||
| IEEE 802.1p QoS | ||||
| Performance | Switching Capacity | 24 Fast Ethernet Ports+2 Gigabit Ethernet Port with Non-blocking Wise Speed Performance | ||
| 8K MAC Address | ||||
| 256K Packet Buffer and 128K Control Memory | ||||
| Multicast / Broadband / Unknown-unicat Storm Suppression | ||||
| Port Mirroring | ||||
| VLAN | Port-base VLAN | |||
| IEEE 802.1q Tag-base VLAN, Maximum 4K, up to 256 Active VLANs | ||||
| Q-in-Q is an Efficient Method for Enabling Subscriber Aggregation | ||||
| VSM | Up to 16 Switches Can be Managed via Single IP | |||
| Virtual Stacking, No Extra Stacking Hardware and Physical Central Wiring Closet are Needed | ||||
| QoS | Port Based, 802.1p, TOS and Diffserv Based QoS Packet Classification | |||
| Supports 4 Level Priority Queues to Prioritize In-bound and Out-bound Traffic | ||||
| Supports Two Scheduling, WRR and Strict | ||||
| Supports Priority in a Q-in-Q Tag | ||||
| Isolated Group | Provide One Group Allows Certain Ports to be Designated as Protected | |||
| Ingress / Egress Rate Limite | 1~24 Ports : 1K up to 100Mbps | |||
| 25, 26 Ports : 1K up to 1000Mbps | ||||
| Protocol | LACP | 2 Fast Ethernet +1 Gigabit Ethernet Groups | ||
| Per-group max 4 Member | ||||
| Provides DA, SA and DA+SA MAC-based trunking with automatic link fail-over | ||||
| GVRP / GARP | IEEE 802.1q with GVRP / GARP | |||
| Multicasting | Supports IGMP Snooping Including Active and Passive Modes | |||
| STP / RSTP | IEEE 802.1d / IEEE 802.1w | |||
| Network Security | IEEE 802.1x Access Control | |||
| Isolated Group | ||||
| Restricate Group | ||||
| Management Access Policy Control | ||||
| SNMPv1, v2C Network Management | RFC 1213 MIB (MIB-II) | Interface MIB | ||
| Address Translation MIB | ||||
| IP MIB | ||||
| ICMP MIB | ||||
| TCP MIB | ||||
| UDP MIB | ||||
| SNMP MIB | ||||
| RFC 1757 RMON MIB | Statistics Group 1 | |||
| History Group 2 | ||||
| Alarm Group 3 | ||||
| Event Group 9 | ||||
| RFC 1493 Bridge MIB | ||||
| RFC 1643 Ethernet MIB | ||||
| Enterprise MIB | ||||
| POE Specification | 24-ports IEEE802.3af POE PSE | |||
| Endpoint with 48VDC Power through RJ-45 pin 1,2,3,6 | ||||
| POE Activity LED Indicator | ||||
| 185 Watts of Total Power (up to 15.4 Watts per 10/100 Port) | ||||
| Auto Detect Powered Device and Consumption Levels | ||||
| Supports per Port Power Consumption Monitoring | ||||
| Circuit Protection to Prevent Power Interference between Ports | ||||
| Supports per Port POE State Setting | ||||
| Supports per Port Power priority Setting | ||||
| Operation Voltage | 100-240 V | |||
| Consumption | 12W | |||
| Weight | 3.3Kg | |||
| Dimensions | 209 x 442 x 44 mm | |||
| Warranty | 1 Year Limited | |||
SFP poorten
De 24 poorts VigorSwitch P2260 beschikt over twee SFP poorten voor flexibele fiber connectie. Met behulp van de SFP poorten zijn switches via een fiber uplink op elkaar aan te sluiten, waardoor een snelle uplink van de ene switch naar de andere switch gerealiseerd kan worden.
